Tips for Detecting Leak by Yourself

 Finding the leak is more complicated than simply looking for a wet patch on the ceiling. Usually, the source of the leak is not the same as the location of the water staining your plasterboard and destroying your paintwork. Water can enter your roof from one end of the home, seep down through insulation, and soak into a void in your ceiling.

Then here comes the complicated question, how can you detect a leak?

Well, for thorough detection, you would require a reliable Roofing Contractors NYC or Leak Detection Manhattan like Manhattan Roofing. But, in case if there is a small problem and you want it to detect by yourself without involving any NYC Residential Roof Contractor, then here are some tips that will help you in this process.

In the whole process, you have to make sure that you inspect outside as well as inside wisely, so start from looking outside.

Outside Inspection

Take a trip outside and assess your roof visually. Start with the areas of the top that are higher than any stains or apparent indicators of roof penetrations on the inside. That could be the possible source of the leak if you notice any damaged patches on your roof, such as tiles, corrugated iron sheets, or shingles. You can also see wet marks on your exterior walls under your roofline. This could indicate that your flashing is damaged and requires repair or Tile Replacement Manhattan. 

Inside Inspection

 After you've checked the outside of your house, go inside and look at the inside of your roof. Look for peeling paint, damp marks, and brown, grey, or yellow stains on your ceiling; these are all symptoms of a leaking NYC Residential Roof Contractor. Grab a flashlight and examine inside your roof area or attic to be especially thorough. Mould, water stains, and wet rafters or beams are all telltale symptoms of a roof leak, and you may even be able to trace the water's path back to its source.